Washing machines are some of the most useful electric appliances in our households. A broken washer is therefore bound to cause a lot of trouble if it is not repaired in time. It’ll helpful to know that most front-loading washing machines, however, tend to face similar issues – and accordingly, the solutions for such problems are also similar.
In fact, you can save some money on westinghouse fridge repair in sydney if you can correctly diagnose and fix a few simple issues. Just keep in mind that the below ones are very basic fixes, and any serious breakdowns will almost definitely require you to find an expert technician to fix the problem.
• The Washer Doesn’t Turn On – Sometimes, the washing machine will fail to turn on. Before panicking, it is suggested to take a look at the wiring and make sure that there are no any lose connections or shorts. Check whether there is any fault in your circuit breakers, fuse boxes and the like. Sometimes though, the plug point to which the machine is plugged in might be the culprit. In that case, plug in any other small working appliance that you can find and see whether it works.
• The Washing Machine Is Not Spinning – This issue occurs frequently, but thankfully it is most often caused due to improper operation of the machine rather than a technical fault. Modern machines need a certain amount of load before they start spinning. If you either trying to wash small loads or too heavy loads, the washing machine sensors will detect it as a potential hazard for the machine, and cause it not to spin to avoid damage. Other reasons for not spinning are worn carbon brush motors (which will require replacing) or an improperly draining machine (which will require a checkup of the pump).
• The Washing Machine Drum is Not Turning – While this can be due to a variety of reasons, it is generally due to worn or faulty parts. Since there is no way to exactly pinpoint the problem, is it generally a good idea to call a shop specializing in appliance repairs for help. Find out more about fridge repair in Sydney, go to this link.
• The Washing Machine is Noisy – A common cause for the excessive noise is any kind of small object, like coins or small metallic parts, stuck in the machine’s drum. Some machines do allow you to access the drum, but this is not always the case. If so, you will have to gain access through the sump hose hole or even the heater hole to remove the objects. Keep in mind that failed bearings can also contribute to excessive noise.